A variable is a name defined in a makefile to represent a string
of text, called the variable's value. These values are
substituted by explicit request into targets, dependencies, commands,
and other parts of the makefile. (In some other versions of make,
variables are called macros.)
Variables and functions in all parts of a makefile are expanded when
read, except for the shell commands in rules, the right-hand sides of
variable definitions using `=', and the bodies of variable
definitions using the define directive.
Variables can represent lists of file names, options to pass to compilers, programs to run, directories to look in for source files, directories to write output in, or anything else you can imagine.
A variable name may be any sequence of characters not containing `:',
`#', `=', or leading or trailing whitespace. However,
variable names containing characters other than letters, numbers, and
underscores should be avoided, as they may be given special meanings in the
future, and with some shells they cannot be passed through the environment to a
sub-make
(see section Communicating Variables to a Sub-make).
Variable names are case-sensitive. The names `foo', `FOO', and `Foo' all refer to different variables.
It is traditional to use upper case letters in variable names, but we recommend using lower case letters for variable names that serve internal purposes in the makefile, and reserving upper case for parameters that control implicit rules or for parameters that the user should override with command options (see section Overriding Variables).
A few variables have names that are a single punctuation character or just a few characters. These are the automatic variables, and they have particular specialized uses. See section Automatic Variables.
To substitute a variable's value, write a dollar sign followed by the name
of the variable in parentheses or braces: either `$(foo)' or
`${foo}' is a valid reference to the variable foo. This
special significance of `$' is why you must write `$$' to have
the effect of a single dollar sign in a file name or command.
Variable references can be used in any context: targets, dependencies, commands, most directives, and new variable values. Here is an example of a common case, where a variable holds the names of all the object files in a program:
objects = program.o foo.o utils.o
program : $(objects)
cc -o program $(objects)
$(objects) : defs.h
Variable references work by strict textual substitution. Thus, the rule
foo = c
prog.o : prog.$(foo)
$(foo)$(foo) -$(foo) prog.$(foo)
could be used to compile a C program `prog.c'. Since spaces before
the variable value are ignored in variable assignments, the value of
foo is precisely `c'. (Don't actually write your makefiles
this way!)
A dollar sign followed by a character other than a dollar sign,
open-parenthesis or open-brace treats that single character as the
variable name. Thus, you could reference the variable x with
`$x'. However, this practice is strongly discouraged, except in
the case of the automatic variables (see section Automatic Variables).
There are two ways that a variable in GNU make can have a value;
we call them the two flavors of variables. The two flavors are
distinguished in how they are defined and in what they do when expanded.
The first flavor of variable is a recursively expanded variable.
Variables of this sort are defined by lines using `='
(see section Setting Variables) or by the define directive
(see section Defining Variables Verbatim). The value you specify
is installed verbatim; if it contains references to other variables,
these references are expanded whenever this variable is substituted (in
the course of expanding some other string). When this happens, it is
called recursive expansion.
For example,
foo = $(bar) bar = $(ugh) ugh = Huh? all:;echo $(foo)
will echo `Huh?': `$(foo)' expands to `$(bar)' which expands to `$(ugh)' which finally expands to `Huh?'.
This flavor of variable is the only sort supported by other versions of
make. It has its advantages and its disadvantages. An advantage
(most would say) is that:
CFLAGS = $(include_dirs) -O include_dirs = -Ifoo -Ibar
will do what was intended: when `CFLAGS' is expanded in a command, it will expand to `-Ifoo -Ibar -O'. A major disadvantage is that you cannot append something on the end of a variable, as in
CFLAGS = $(CFLAGS) -O
because it will cause an infinite loop in the variable expansion.
(Actually make detects the infinite loop and reports an error.)
Another disadvantage is that any functions
(see section Functions for Transforming Text)
referenced in the definition will be executed every time the variable is
expanded. This makes make run slower; worse, it causes the
wildcard and shell functions to give unpredictable results
because you cannot easily control when they are called, or even how many
times.
To avoid all the problems and inconveniences of recursively expanded variables, there is another flavor: simply expanded variables.
Simply expanded variables are defined by lines using `:=' (see section Setting Variables). The value of a simply expanded variable is scanned once and for all, expanding any references to other variables and functions, when the variable is defined. The actual value of the simply expanded variable is the result of expanding the text that you write. It does not contain any references to other variables; it contains their values as of the time this variable was defined. Therefore,
x := foo y := $(x) bar x := later
is equivalent to
y := foo bar x := later
When a simply expanded variable is referenced, its value is substituted verbatim.
Here is a somewhat more complicated example, illustrating the use of
`:=' in conjunction with the shell function.
(See section The shell Function.) This example
also shows use of the variable MAKELEVEL, which is changed
when it is passed down from level to level.
(See section Communicating Variables to a Sub-make, for information about MAKELEVEL.)
ifeq (0,${MAKELEVEL})
cur-dir := $(shell pwd)
whoami := $(shell whoami)
host-type := $(shell arch)
MAKE := ${MAKE} host-type=${host-type} whoami=${whoami}
endif
An advantage of this use of `:=' is that a typical `descend into a directory' command then looks like this:
${subdirs}:
${MAKE} cur-dir=${cur-dir}/$@ -C $@ all
Simply expanded variables generally make complicated makefile programming more predictable because they work like variables in most programming languages. They allow you to redefine a variable using its own value (or its value processed in some way by one of the expansion functions) and to use the expansion functions much more efficiently (see section Functions for Transforming Text).
You can also use them to introduce controlled leading whitespace into variable values. Leading whitespace characters are discarded from your input before substitution of variable references and function calls; this means you can include leading spaces in a variable value by protecting them with variable references, like this:
nullstring := space := $(nullstring) # end of the line
Here the value of the variable space is precisely one space. The
comment `# end of the line' is included here just for clarity.
Since trailing space characters are not stripped from variable
values, just a space at the end of the line would have the same effect
(but be rather hard to read). If you put whitespace at the end of a
variable value, it is a good idea to put a comment like that at the end
of the line to make your intent clear. Conversely, if you do not
want any whitespace characters at the end of your variable value, you
must remember not to put a random comment on the end of the line after
some whitespace, such as this:
dir := /foo/bar # directory to put the frobs in
Here the value of the variable dir is `/foo/bar '
(with four trailing spaces), which was probably not the intention.
(Imagine something like `$(dir)/file' with this definition!)
This section describes some advanced features you can use to reference variables in more flexible ways.
A substitution reference substitutes the value of a variable with alterations that you specify. It has the form `$(var:a=b)' (or `${var:a=b}') and its meaning is to take the value of the variable var, replace every a at the end of a word with b in that value, and substitute the resulting string.
When we say "at the end of a word", we mean that a must appear either followed by whitespace or at the end of the value in order to be replaced; other occurrences of a in the value are unaltered. For example:
foo := a.o b.o c.o bar := $(foo:.o=.c)
sets `bar' to `a.c b.c c.c'. See section Setting Variables.
A substitution reference is actually an abbreviation for use of the
patsubst expansion function (see section Functions for String Substitution and Analysis). We provide
substitution references as well as patsubst for compatibility with
other implementations of make.
Another type of substitution reference lets you use the full power of
the patsubst function. It has the same form
`$(var:a=b)' described above, except that now
a must contain a single `%' character. This case is
equivalent to `$(patsubst a,b,$(var))'.
See section Functions for String Substitution and Analysis,
for a description of the patsubst function.
For example: foo := a.o b.o c.o bar := $(foo:%.o=%.c)
sets `bar' to `a.c b.c c.c'.
Computed variable names are a complicated concept needed only for sophisticated makefile programming. For most purposes you need not consider them, except to know that making a variable with a dollar sign in its name might have strange results. However, if you are the type that wants to understand everything, or you are actually interested in what they do, read on.
Variables may be referenced inside the name of a variable. This is called a computed variable name or a nested variable reference. For example,
x = y y = z a := $($(x))
defines a as `z': the `$(x)' inside `$($(x))' expands
to `y', so `$($(x))' expands to `$(y)' which in turn expands
to `z'. Here the name of the variable to reference is not stated
explicitly; it is computed by expansion of `$(x)'. The reference
`$(x)' here is nested within the outer variable reference.
The previous example shows two levels of nesting, but any number of levels is possible. For example, here are three levels:
x = y y = z z = u a := $($($(x)))
Here the innermost `$(x)' expands to `y', so `$($(x))' expands to `$(y)' which in turn expands to `z'; now we have `$(z)', which becomes `u'.
References to recursively-expanded variables within a variable name are reexpanded in the usual fashion. For example:
x = $(y) y = z z = Hello a := $($(x))
defines a as `Hello': `$($(x))' becomes `$($(y))'
which becomes `$(z)' which becomes `Hello'.
Nested variable references can also contain modified references and
function invocations (see section Functions for Transforming Text),
just like any other reference.
For example, using the subst function
(see section Functions for String Substitution and Analysis):
x = variable1 variable2 := Hello y = $(subst 1,2,$(x)) z = y a := $($($(z)))
eventually defines a as `Hello'. It is doubtful that anyone
would ever want to write a nested reference as convoluted as this one, but
it works: `$($($(z)))' expands to `$($(y))' which becomes
`$($(subst 1,2,$(x)))'. This gets the value `variable1' from
x and changes it by substitution to `variable2', so that the
entire string becomes `$(variable2)', a simple variable reference
whose value is `Hello'.
A computed variable name need not consist entirely of a single variable reference. It can contain several variable references, as well as some invariant text. For example,
a_dirs := dira dirb 1_dirs := dir1 dir2 a_files := filea fileb 1_files := file1 file2 ifeq "$(use_a)" "yes" a1 := a else a1 := 1 endif ifeq "$(use_dirs)" "yes" df := dirs else df := files endif dirs := $($(a1)_$(df))
will give dirs the same value as a_dirs, 1_dirs,
a_files or 1_files depending on the settings of use_a
and use_dirs.
Computed variable names can also be used in substitution references:
a_objects := a.o b.o c.o 1_objects := 1.o 2.o 3.o sources := $($(a1)_objects:.o=.c)
defines sources as either `a.c b.c c.c' or `1.c 2.c 3.c',
depending on the value of a1.
The only restriction on this sort of use of nested variable references is that they cannot specify part of the name of a function to be called. This is because the test for a recognized function name is done before the expansion of nested references. For example,
ifdef do_sort func := sort else func := strip endif bar := a d b g q c foo := $($(func) $(bar))
attempts to give `foo' the value of the variable `sort a d b g
q c' or `strip a d b g q c', rather than giving `a d b g q c'
as the argument to either the sort or the strip function.
This restriction could be removed in the future if that change is shown
to be a good idea.
You can also use computed variable names in the left-hand side of a
variable assignment, or in a define directive, as in:
dir = foo $(dir)_sources := $(wildcard $(dir)/*.c) define $(dir)_print lpr $($(dir)_sources) endef
This example defines the variables `dir', `foo_sources', and `foo_print'.
Note that nested variable references are quite different from recursively expanded variables (see section The Two Flavors of Variables), though both are used together in complex ways when doing makefile programming.
Variables can get values in several different ways:
make.
See section Overriding Variables.
make variables.
See section Variables from the Environment.
To set a variable from the makefile, write a line starting with the variable name followed by `=' or `:='. Whatever follows the `=' or `:=' on the line becomes the value. For example,
objects = main.o foo.o bar.o utils.o
defines a variable named objects. Whitespace around the variable
name and immediately after the `=' is ignored.
Variables defined with `=' are recursively expanded variables. Variables defined with `:=' are simply expanded variables; these definitions can contain variable references which will be expanded before the definition is made. See section The Two Flavors of Variables.
The variable name may contain function and variable references, which are expanded when the line is read to find the actual variable name to use.
There is no limit on the length of the value of a variable except the
amount of swapping space on the computer. When a variable definition is
long, it is a good idea to break it into several lines by inserting
backslash-newline at convenient places in the definition. This will not
affect the functioning of make, but it will make the makefile easier
to read.
Most variable names are considered to have the empty string as a value if you have never set them. Several variables have built-in initial values that are not empty, but you can set them in the usual ways (see section Variables Used by Implicit Rules). Several special variables are set automatically to a new value for each rule; these are called the automatic variables (see section Automatic Variables).
Often it is useful to add more text to the value of a variable already defined. You do this with a line containing `+=', like this:
objects += another.o
This takes the value of the variable objects, and adds the text
`another.o' to it (preceded by a single space). Thus:
objects = main.o foo.o bar.o utils.o objects += another.o
sets objects to `main.o foo.o bar.o utils.o another.o'.
Using `+=' is similar to:
objects = main.o foo.o bar.o utils.o objects := $(objects) another.o
but differs in ways that become important when you use more complex values.
When the variable in question has not been defined before, `+=' acts just like normal `=': it defines a recursively-expanded variable. However, when there is a previous definition, exactly what `+=' does depends on what flavor of variable you defined originally. See section The Two Flavors of Variables, for an explanation of the two flavors of variables.
When you add to a variable's value with `+=', make acts
essentially as if you had included the extra text in the initial
definition of the variable. If you defined it first with `:=',
making it a simply-expanded variable, `+=' adds to that
simply-expanded definition, and expands the new text before appending it
to the old value just as `:=' does
(see section Setting Variables, for a full explanation of `:=').
In fact,
variable := value variable += more
is exactly equivalent to:
variable := value variable := $(variable) more
On the other hand, when you use `+=' with a variable that you defined
first to be recursively-expanded using plain `=', make does
something a bit different. Recall that when you define a
recursively-expanded variable, make does not expand the value you set
for variable and function references immediately. Instead it stores the text
verbatim, and saves these variable and function references to be expanded
later, when you refer to the new variable (see section The Two Flavors of Variables). When you use `+=' on a recursively-expanded variable,
it is this unexpanded text to which make appends the new text you
specify.
variable = value variable += more
is roughly equivalent to:
temp = value variable = $(temp) more
except that of course it never defines a variable called temp.
The importance of this comes when the variable's old value contains
variable references. Take this common example:
CFLAGS = $(includes) -O ... CFLAGS += -pg # enable profiling
The first line defines the CFLAGS variable with a reference to another
variable, includes. (CFLAGS is used by the rules for C
compilation; see section Catalogue of Implicit Rules.)
Using `=' for the definition makes CFLAGS a recursively-expanded
variable, meaning `$(includes) -O' is not expanded when
make processes the definition of CFLAGS. Thus, includes
need not be defined yet for its value to take effect. It only has to be
defined before any reference to CFLAGS. If we tried to append to the
value of CFLAGS without using `+=', we might do it like this:
CFLAGS := $(CFLAGS) -pg # enable profiling
This is pretty close, but not quite what we want. Using `:='
redefines CFLAGS as a simply-expanded variable; this means
make expands the text `$(CFLAGS) -pg' before setting the
variable. If includes is not yet defined, we get ` -O
-pg', and a later definition of includes will have no effect.
Conversely, by using `+=' we set CFLAGS to the
unexpanded value `$(includes) -O -pg'. Thus we preserve
the reference to includes, so if that variable gets defined at
any later point, a reference like `$(CFLAGS)' still uses its
value.
override Directive
If a variable has been set with a command argument
(see section Overriding Variables),
then ordinary assignments in the makefile are ignored. If you want to set
the variable in the makefile even though it was set with a command
argument, you can use an override directive, which is a line that
looks like this:
override variable = value
or
override variable := value
To append more text to a variable defined on the command line, use:
override variable += more text
See section Appending More Text to Variables.
The override directive was not invented for escalation in the war
between makefiles and command arguments. It was invented so you can alter
and add to values that the user specifies with command arguments.
For example, suppose you always want the `-g' switch when you run the
C compiler, but you would like to allow the user to specify the other
switches with a command argument just as usual. You could use this
override directive:
override CFLAGS += -g
You can also use override directives with define directives.
This is done as you might expect:
override define foo bar endef
See the next section for information about define.
Another way to set the value of a variable is to use the define
directive. This directive has an unusual syntax which allows newline
characters to be included in the value, which is convenient for defining
canned sequences of commands
(see section Defining Canned Command Sequences).
The define directive is followed on the same line by the name of the
variable and nothing more. The value to give the variable appears on the
following lines. The end of the value is marked by a line containing just
the word endef. Aside from this difference in syntax, define
works just like `=': it creates a recursively-expanded variable
(see section The Two Flavors of Variables).
The variable name may contain function and variable references, which
are expanded when the directive is read to find the actual variable name
to use.
define two-lines echo foo echo $(bar) endef
The value in an ordinary assignment cannot contain a newline; but the
newlines that separate the lines of the value in a define become
part of the variable's value (except for the final newline which precedes
the endef and is not considered part of the value).
The previous example is functionally equivalent to this:
two-lines = echo foo; echo $(bar)
since two commands separated by semicolon behave much like two separate
shell commands. However, note that using two separate lines means
make will invoke the shell twice, running an independent subshell
for each line. See section Command Execution.
If you want variable definitions made with define to take
precedence over command-line variable definitions, you can use the
override directive together with define:
override define two-lines foo $(bar) endef
See section The override Directive.
Variables in make can come from the environment in which
make is run. Every environment variable that make sees when
it starts up is transformed into a make variable with the same name
and value. But an explicit assignment in the makefile, or with a command
argument, overrides the environment. (If the `-e' flag is specified,
then values from the environment override assignments in the makefile.
See section Summary of Options.
But this is not recommended practice.)
Thus, by setting the variable CFLAGS in your environment, you can
cause all C compilations in most makefiles to use the compiler switches you
prefer. This is safe for variables with standard or conventional meanings
because you know that no makefile will use them for other things. (But
this is not totally reliable; some makefiles set CFLAGS explicitly
and therefore are not affected by the value in the environment.)
When make is invoked recursively, variables defined in the
outer invocation can be passed to inner invocations through the
environment (see section Recursive Use of make). By
default, only variables that came from the environment or the command
line are passed to recursive invocations. You can use the
export directive to pass other variables.
See section Communicating Variables to a Sub-make, for full details.
Other use of variables from the environment is not recommended. It is not wise for makefiles to depend for their functioning on environment variables set up outside their control, since this would cause different users to get different results from the same makefile. This is against the whole purpose of most makefiles.
Such problems would be especially likely with the variable SHELL,
which is normally present in the environment to specify the user's choice
of interactive shell. It would be very undesirable for this choice to
affect make. So make ignores the environment value of
SHELL.
Go to the first, previous, next, last section, table of contents.