Functions for Transforming Text

Functions allow you to do text processing in the makefile to compute the files to operate on or the commands to use. You use a function in a function call, where you give the name of the function and some text (the arguments) for the function to operate on. The result of the function's processing is substituted into the makefile at the point of the call, just as a variable might be substituted.

• Syntax of Functions: How to write a function call.
• Text Functions: General-purpose text manipulation functions.
• Filename Functions: Functions for manipulating file names.
• Foreach Function: Repeat some text with controlled variation.
• Origin Function: Find where a variable got its value.
• Shell Function: Substitute the output of a shell command.

Function Call Syntax

A function call resembles a variable reference. It looks like this:

$(function arguments)

or like this:

${function arguments}

Here function is a function name; one of a short list of names that are part of make. There is no provision for defining new functions.

The arguments are the arguments of the function. They are separated from the function name by one or more spaces or tabs, and if there is more than one argument, then they are separated by commas. Such whitespace and commas are not part of an argument's value. The delimiters which you use to surround the function call, whether parentheses or braces, can appear in an argument only in matching pairs; the other kind of delimiters may appear singly. If the arguments themselves contain other function calls or variable references, it is wisest to use the same kind of delimiters for all the references; write `$(subst a,b,$(x))', not `$(subst a,b,${x})'. This is because it is clearer, and because only one type of delimiter is matched to find the end of the reference.

The text written for each argument is processed by substitution of variables and function calls to produce the argument value, which is the text on which the function acts. The substitution is done in the order in which the arguments appear.

Commas and unmatched parentheses or braces cannot appear in the text of an argument as written; leading spaces cannot appear in the text of the first argument as written. These characters can be put into the argument value by variable substitution. First define variables comma and space whose values are isolated comma and space characters, then substitute these variables where such characters are wanted, like this:

comma:= ,
empty:=
space:= $(empty) $(empty)
foo:= a b c
bar:= $(subst $(space),$(comma),$(foo))
# bar is now `a,b,c'.

Here the subst function replaces each space with a comma, through the value of foo, and substitutes the result.

Functions for String Substitution and Analysis

Here are some functions that operate on strings:

$(subst from,to,text)

Performs a textual replacement on the text text: each occurrence of from is replaced by to. The result is substituted for the function call. For example,

$(subst ee,EE,feet on the street)

substitutes the string `fEEt on the strEEt'.

$(patsubst pattern,replacement,text)

Finds whitespace-separated words in text that match pattern and replaces them with replacement. Here pattern may contain a `%' which acts as a wildcard, matching any number of any characters within a word. If replacement also contains a `%', the `%' is replaced by the text that matched the `%' in pattern. `%' characters in patsubst function invocations can be quoted with preceding backslashes (`\'). Backslashes that would otherwise quote `%' characters can be quoted with more backslashes. Backslashes that quote `%' characters or other backslashes are removed from the pattern before it is compared file names or has a stem substituted into it. Backslashes that are not in danger of quoting `%' characters go unmolested. For example, the pattern `the\%weird\\%pattern\\' has `the%weird\' preceding the operative `%' character, and `pattern\\' following it. The final two backslashes are left alone because they cannot affect any `%' character. Whitespace between words is folded into single space characters; leading and trailing whitespace is discarded. For example,

$(patsubst %.c,%.o,x.c.c bar.c)

produces the value `x.c.o bar.o'. Substitution references (see section Substitution References) are a simpler way to get the effect of the patsubst function:

$(var:pattern=replacement)

is equivalent to

$(patsubst pattern,replacement,$(var))

The second shorthand simplifies one of the most common uses of patsubst: replacing the suffix at the end of file names.

$(var:suffix=replacement)

is equivalent to

$(patsubst %suffix,%replacement,$(var))

For example, you might have a list of object files:

objects = foo.o bar.o baz.o

To get the list of corresponding source files, you could simply write:

$(objects:.o=.c)

instead of using the general form:

$(patsubst %.o,%.c,$(objects))

$(strip string)

Removes leading and trailing whitespace from string and replaces each internal sequence of one or more whitespace characters with a single space. Thus, `$(strip a b c )' results in `a b c'. The function strip can be very useful when used in conjunction with conditionals. When comparing something with the empty string `' using ifeq or ifneq, you usually want a string of just whitespace to match the empty string (see section Conditional Parts of Makefiles). Thus, the following may fail to have the desired results:

.PHONY: all
ifneq   "$(needs_made)" ""
all: $(needs_made)
else
all:;@echo 'Nothing to make!'
endif

Replacing the variable reference `$(needs_made)' with the function call `$(strip $(needs_made))' in the ifneq directive would make it more robust.

$(findstring find,in)

Searches in for an occurrence of find. If it occurs, the value is find; otherwise, the value is empty. You can use this function in a conditional to test for the presence of a specific substring in a given string. Thus, the two examples,

$(findstring a,a b c)
$(findstring a,b c)

produce the values `a' and `' (the empty string), respectively. See section Conditionals that Test Flags, for a practical application of findstring.

$(filter pattern...,text)

Removes all whitespace-separated words in text that do not match any of the pattern words, returning only matching words. The patterns are written using `%', just like the patterns used in the patsubst function above. The filter function can be used to separate out different types of strings (such as file names) in a variable. For example:

sources := foo.c bar.c baz.s ugh.h
foo: $(sources)
        cc $(filter %.c %.s,$(sources)) -o foo

says that `foo' depends of `foo.c', `bar.c', `baz.s' and `ugh.h' but only `foo.c', `bar.c' and `baz.s' should be specified in the command to the compiler.

$(filter-out pattern...,text)

Removes all whitespace-separated words in text that do match the pattern words, returning only the words that do not match. This is the exact opposite of the filter function. For example, given:

objects=main1.o foo.o main2.o bar.o
mains=main1.o main2.o

the following generates a list which contains all the object files not in `mains':

$(filter-out $(mains),$(objects))

$(sort list)

Sorts the words of list in lexical order, removing duplicate words. The output is a list of words separated by single spaces. Thus,

$(sort foo bar lose)

returns the value `bar foo lose'. Incidentally, since sort removes duplicate words, you can use it for this purpose even if you don't care about the sort order.

Here is a realistic example of the use of subst and patsubst. Suppose that a makefile uses the VPATH variable to specify a list of directories that make should search for dependency files (see section VPATH: Search Path for All Dependencies). This example shows how to tell the C compiler to search for header files in the same list of directories.

The value of VPATH is a list of directories separated by colons, such as `src:../headers'. First, the subst function is used to change the colons to spaces:

$(subst :, ,$(VPATH))

This produces `src ../headers'. Then patsubst is used to turn each directory name into a `-I' flag. These can be added to the value of the variable CFLAGS, which is passed automatically to the C compiler, like this:

override CFLAGS += $(patsubst %,-I%,$(subst :, ,$(VPATH)))

The effect is to append the text `-Isrc -I../headers' to the previously given value of CFLAGS. The override directive is used so that the new value is assigned even if the previous value of CFLAGS was specified with a command argument (see section The override Directive).

Functions for File Names

Several of the built-in expansion functions relate specifically to taking apart file names or lists of file names.

Each of the following functions performs a specific transformation on a file name. The argument of the function is regarded as a series of file names, separated by whitespace. (Leading and trailing whitespace is ignored.) Each file name in the series is transformed in the same way and the results are concatenated with single spaces between them.

$(dir names...)

Extracts the directory-part of each file name in names. The directory-part of the file name is everything up through (and including) the last slash in it. If the file name contains no slash, the directory part is the string `./'. For example,

$(dir src/foo.c hacks)

produces the result `src/ ./'.

$(notdir names...)

Extracts all but the directory-part of each file name in names. If the file name contains no slash, it is left unchanged. Otherwise, everything through the last slash is removed from it. A file name that ends with a slash becomes an empty string. This is unfortunate, because it means that the result does not always have the same number of whitespace-separated file names as the argument had; but we do not see any other valid alternative. For example,

$(notdir src/foo.c hacks)

produces the result `foo.c hacks'.

$(suffix names...)

Extracts the suffix of each file name in names. If the file name contains a period, the suffix is everything starting with the last period. Otherwise, the suffix is the empty string. This frequently means that the result will be empty when names is not, and if names contains multiple file names, the result may contain fewer file names. For example,

$(suffix src/foo.c hacks)

produces the result `.c'.

$(basename names...)

Extracts all but the suffix of each file name in names. If the file name contains a period, the basename is everything starting up to (and not including) the last period. Otherwise, the basename is the entire file name. For example,

$(basename src/foo.c hacks)

produces the result `src/foo hacks'.

$(addsuffix suffix,names...)

The argument names is regarded as a series of names, separated by whitespace; suffix is used as a unit. The value of suffix is appended to the end of each individual name and the resulting larger names are concatenated with single spaces between them. For example,

$(addsuffix .c,foo bar)

produces the result `foo.c bar.c'.

$(addprefix prefix,names...)

The argument names is regarded as a series of names, separated by whitespace; prefix is used as a unit. The value of prefix is prepended to the front of each individual name and the resulting larger names are concatenated with single spaces between them. For example,

$(addprefix src/,foo bar)

produces the result `src/foo src/bar'.

$(join list1,list2)

Concatenates the two arguments word by word: the two first words (one from each argument) concatenated form the first word of the result, the two second words form the second word of the result, and so on. So the nth word of the result comes from the nth word of each argument. If one argument has more words that the other, the extra words are copied unchanged into the result. For example, `$(join a b,.c .o)' produces `a.c b.o'. Whitespace between the words in the lists is not preserved; it is replaced with a single space. This function can merge the results of the dir and notdir functions, to produce the original list of files which was given to those two functions.

$(word n,text)

Returns the nth word of text. The legitimate values of n start from 1. If n is bigger than the number of words in text, the value is empty. For example,

$(word 2, foo bar baz)

returns `bar'.

$(words text)

Returns the number of words in text. Thus, the last word of text is $(word $(words text),text).

$(firstword names...)

The argument names is regarded as a series of names, separated by whitespace. The value is the first name in the series. The rest of the names are ignored. For example,

$(firstword foo bar)

produces the result `foo'. Although $(firstword text) is the same as $(word 1,text), the firstword function is retained for its simplicity.

$(wildcard pattern)

The argument pattern is a file name pattern, typically containing wildcard characters (as in shell file name patterns). The result of wildcard is a space-separated list of the names of existing files that match the pattern. See section Using Wildcard Characters in File Names.

The foreach Function

The foreach function is very different from other functions. It causes one piece of text to be used repeatedly, each time with a different substitution performed on it. It resembles the for command in the shell sh and the foreach command in the C-shell csh.

The syntax of the foreach function is:

$(foreach var,list,text)

The first two arguments, var and list, are expanded before anything else is done; note that the last argument, text, is not expanded at the same time. Then for each word of the expanded value of list, the variable named by the expanded value of var is set to that word, and text is expanded. Presumably text contains references to that variable, so its expansion will be different each time.

The result is that text is expanded as many times as there are whitespace-separated words in list. The multiple expansions of text are concatenated, with spaces between them, to make the result of foreach.

This simple example sets the variable `files' to the list of all files in the directories in the list `dirs':

dirs := a b c d
files := $(foreach dir,$(dirs),$(wildcard $(dir)/*))

Here text is `$(wildcard $(dir)/*)'. The first repetition finds the value `a' for dir, so it produces the same result as `$(wildcard a/*)'; the second repetition produces the result of `$(wildcard b/*)'; and the third, that of `$(wildcard c/*)'.

This example has the same result (except for setting `dirs') as the following example:

files := $(wildcard a/* b/* c/* d/*)

When text is complicated, you can improve readability by giving it a name, with an additional variable:

find_files = $(wildcard $(dir)/*)
dirs := a b c d
files := $(foreach dir,$(dirs),$(find_files))

Here we use the variable find_files this way. We use plain `=' to define a recursively-expanding variable, so that its value contains an actual function call to be reexpanded under the control of foreach; a simply-expanded variable would not do, since wildcard would be called only once at the time of defining find_files.

The foreach function has no permanent effect on the variable var; its value and flavor after the foreach function call are the same as they were beforehand. The other values which are taken from list are in effect only temporarily, during the execution of foreach. The variable var is a simply-expanded variable during the execution of foreach. If var was undefined before the foreach function call, it is undefined after the call. See section The Two Flavors of Variables.

You must take care when using complex variable expressions that result in variable names because many strange things are valid variable names, but are probably not what you intended. For example,

files := $(foreach Esta escrito en espanol!,b c ch,$(find_files))

might be useful if the value of find_files references the variable whose name is `Esta escrito en espanol!' (es un nombre bastante largo, no?), but it is more likely to be a mistake.

The origin Function

The origin function is unlike most other functions in that it does not operate on the values of variables; it tells you something about a variable. Specifically, it tells you where it came from.

The syntax of the origin function is:

$(origin variable)

Note that variable is the name of a variable to inquire about; not a reference to that variable. Therefore you would not normally use a `$' or parentheses when writing it. (You can, however, use a variable reference in the name if you want the name not to be a constant.)

The result of this function is a string telling you how the variable variable was defined:

`undefined'

if variable was never defined.

`default'

if variable has a default definition, as is usual with CC and so on. See section Variables Used by Implicit Rules. Note that if you have redefined a default variable, the origin function will return the origin of the later definition.

`environment'

if variable was defined as an environment variable and the `-e' option is not turned on (see section Summary of Options).

`environment override'

if variable was defined as an environment variable and the `-e' option is turned on (see section Summary of Options).

`file'

if variable was defined in a makefile.

`command line'

if variable was defined on the command line.

`override'

if variable was defined with an override directive in a makefile (see section The override Directive).

`automatic'

if variable is an automatic variable defined for the execution of the commands for each rule (see section Automatic Variables).

This information is primarily useful (other than for your curiosity) to determine if you want to believe the value of a variable. For example, suppose you have a makefile `foo' that includes another makefile `bar'. You want a variable bletch to be defined in `bar' if you run the command `make -f bar', even if the environment contains a definition of bletch. However, if `foo' defined bletch before including `bar', you do not want to override that definition. This could be done by using an override directive in `foo', giving that definition precedence over the later definition in `bar'; unfortunately, the override directive would also override any command line definitions. So, `bar' could include:

ifdef bletch
ifeq "$(origin bletch)" "environment"
bletch = barf, gag, etc.
endif
endif

If bletch has been defined from the environment, this will redefine it.

If you want to override a previous definition of bletch if it came from the environment, even under `-e', you could instead write:

ifneq "$(findstring environment,$(origin bletch))" ""
bletch = barf, gag, etc.
endif

Here the redefinition takes place if `$(origin bletch)' returns either `environment' or `environment override'. See section Functions for String Substitution and Analysis.

The shell Function

The shell function is unlike any other function except the wildcard function (see section The Function wildcard) in that it communicates with the world outside of make.

The shell function performs the same function that backquotes (``') perform in most shells: it does command expansion. This means that it takes an argument that is a shell command and returns the output of the command. The only processing make does on the result, before substituting it into the surrounding text, is to convert newlines to spaces.

The commands run by calls to the shell function are run when the function calls are expanded. In most cases, this is when the makefile is read in. The exception is that function calls in the commands of the rules are expanded when the commands are run, and this applies to shell function calls like all others.

Here are some examples of the use of the shell function:

contents := $(shell cat foo)

sets contents to the contents of the file `foo', with a space (rather than a newline) separating each line.

files := $(shell echo *.c)

sets files to the expansion of `*.c'. Unless make is using a very strange shell, this has the same result as `$(wildcard *.c)'.

Go to the first, previous, next, last section, table of contents.